Pay attention to the size and type of ultra-thin tact switch electrical load
When using the tact switch, pay attention to the size and type of the electric load. Because of the different types of tact switches, the electrical load bearing capacity varies greatly. In the mechanical equipment, a relatively large type of tact switch, such as an AN type, is generally used, which can be used in an automatic electromagnetic switch of an AC motor, and an automatic program changeover of a manual start, an emergency brake, a hydraulic press, and the like. Improper installation of the switch, especially the switch is placed on the flammable object. The tact switch indicates that once the sheath at the lead wire is scratched, the core will be exposed or the water vapor will infiltrate, causing a short circuit or an arc caused by the switch being disconnected. Get angry. Mechanical buttons are tactile switches that are typically controlled by computer boards for semi-automated periods. If you are not familiar with related products such as tact switches, please consult us. The illuminated tactile switch is easy to fail due to the bulb, the failure of the bulb is not equal to the failure of the switch, and the illumination bulb can be replaced from the front of the panel. Multi-unit tact switches are often installed in rows, and each unit can operate independently. The characteristics of the tact switch are that it is installed in the machine and instrument in progress, and most of the time is in the position of the initial free state, but only when required, it is switched to the second state (position) under the action of external force. Once the external force is removed, the switch returns to the initial position due to the action of the spring.
Therefore, most of today's electrical buttons are replaced by conductive rubber, such as computer keyboards, remote controls, and so on. Tact switch No matter the pull switch, the small push button switch is still a large rocker switch, all belong to the mechanical switch, and the function of the switch is completed after the mechanical control conductor touches and breaks. Electronic switches, which are usually operated with weak electrical signals, are now more widely used. The characteristics of the tact switch are that it is installed in the machine and instrument in progress, and most of the time is in the position of the initial free state, but only when required, it is switched to the second state (position) under the action of external force. Once the external force is removed, the tactile switch returns to the initial position due to the action of the spring. When using the tact switch, pay attention to the size and type of the electric load. Because of the different types of tact switches, the electrical load bearing capacity varies greatly. In the mechanical equipment, a relatively large type of tact switch, such as an AN type, is generally used, which can be used in an automatic electromagnetic switch of an AC motor, and an automatic program changeover of a manual start, an emergency brake, a hydraulic press, and the like. Is the socket is pressed by flammable materials or the dust falls into the short circuit, or installed in a flammable and explosive place, sparks caused by sparks when plugging or unplugging; it is the working voltage and working current of the household appliance and the socket used. The power does not match, long-term overload, once the temperature is too high, it will cause a fire. Ultra-thin tact switch supply
Due to its small size, multi-gear position, and good driving force, it has been widely used in many fields such as household appliances. With the continuous improvement of people's living standards, the upgrading of these household appliances is getting faster and faster, and the number of them needs to be larger and larger. This is also the biggest potential direction for us to be optimistic about its development prospects.
